Each and every home should have a toilet because it serves a very important function. This is obvious, however, what might not be so obvious is how to take care of common toilet problems every homeowner will come across at one point or another. Instead of having to call a plumber each and every time your toilet acts up, or having it turn into a nightmare issue, we’re going to show you some easy fixes and DIY tricks for common issues. Clogging and leakages are some of the most common problems that develop with time in our toilets, and below we’ll show you 5 of these issues and how to overcome them.
Phantom flushes simply refer to water trickling in the bowl. You can sometimes hear your toilet refilling spontaneously as if someone flushed it. The primary cause of phantom flush is leakage of water from the tank to the bowl. The solution to this problem is that you should drain the water in the tank and the bowl and then clean the flapper. If the flapper is worn out or damaged they should be replaced with a new one.
The Bowl Emptying Slowly
If your toilets bowl loses water slowly then this problem is known as the weak flush. This is usually caused by clogging that occurs under the rim of the toilet bowl. To solve this problem you should remove the clogs using a wire and other tools. Water passing through a hosepipe can also be used to remove the clogs. While removing the clogs you should be careful to avoid scratching the bowl.
In the Tank, If you hear some hissing sounds in your toilet then you should know that it is caused by water trickling in your tank. Sump Pump Reviews might be able to help fix this problem every once in a while if you find the right one. If the inlet valve allows the coming water to pass through it then this hissing sound is produced. To solve this problem you should adjust the float and you should also make sure that the tubes are correctly fixed and connected. In case of any further challenges, you can call a plumber to fix the problem.
Standard toilets usually have five seals which can leak at any time. For you to know which seal is the one that is leaking, you have to check all of them and tighten the ones that are loose. Faulty seals should be replaced by new ones. If the leakage is not massive then wax can be used to prevent the leakage. If the work is difficult for you to perform then you are encouraged to seek assistance from specialists such as plumbers.
Clogging is one of the major problems with the toilets that almost everyone has experienced. You will know if your toilet is clogging when you see that the wastes are not flushed away. Clogging usually makes the clogs to draining the water in the bowl slowly thus causing water loss and this creates a dangerous environment. This is also why getting a good toilet from the beginning is important because a quality toilet won’t clog as much. Kholer is a strong brand if you want quality, and we’ve found that ShopToilet has the best Kohler toilet reviews, so check it out if you’re in the market for a new toilet. For you to solve this problem you should remove the clogs using a wire and other tools. Water passing through a hosepipe can also be used to remove the clogs. While removing the clogs you should be careful to avoid scratch the bowl.
These are some of the main problems that we come across in our day to day life. Fixing these problems is usually very easy and you can fix them without the help of a plumber, all you need is a couple tools and some little knowledge so that you can be able to fix these problems.